How To Reset Maintenance Light On Toyota Corolla 2016 References. Turn your vehicle’s ignition to the acc setting while holding the button.usually, service technicians who service your vehicle will reset the toyota maintenance light.usually, service technicians who service your vehicle will reset the toyota maintenance light. Push and hold down the odo button and push the power button twice with your foot off the brake.

Reset Maintenance Light on 20142016 Toyota Corolla YouTube from www.youtube.com

If not, repeat this process once or twice more to turn off the maintenance light on the toyota corolla. If that doesn’t work, try repeating those steps. Press and hold the trip reset button near the odometer until “trip a” appears on the central screen.

While Pressing The Reset Button, Turn The Key Back Into The “On” Position.

Then hold odo/trip reset button, then press the “ engine start stop button ” twice or turn ignition on only, don’t release the odo/trip button, until the resetting oil maintenance data or “ 000000 ” is displayed. How to reset maintenance light on toyota corolla 2016 hold the odometer button until the light goes out. U need to put it on trip a (with the key off) once u get in on trip a, push and hold the button down,while holding button down turn key on, you will see lines pop up on the odometer, (where the miles are displayed) they will go out one.

Locate And Press And Hold The “Trip Reset” Button On The Odometer.

Turn the key so the car is on. Wait until the display of the odometer reads all 00000 before releasing the button. If that doesn’t work, try repeating those steps.

The Light Should Be Off Once The Corolla Starts.

To reset the 2016 toyota corolla maintenance light after an oil change, please follow these instructions: While pressing the button to reset the trip, turn the key back to the “on” position. Ensure trip metre a reading is.

When A Service Technician Changes The Engine Oil In The Corolla, He Resets The Maintenance Light So It Will Not Turn On Again Until The Mileage Threshold Is Reached.

If they forgot to do so, it’s a pretty easy thing for you to take care of on your own. 2009 toyota corolla how to reset warning lights for the abs and brake lights someone needs to access the body computer with a scanner to clear the code or codes and turn the light off. At the “reset data” prompt, select “yes“.

Savannah Toyota Provides Toyota Corolla Service.

Press and hold the trip reset button near the odometer until “trip a” appears on the screen. Press the engine start stop switch once (do not start engine) or turn ignition key to run (one position before starting engine). Insert the keys in the corolla.